B2B Telecom Equipment Supplier — Request a Quote Todayتأمین‌کننده B2B تجهیزات مخابراتی — امروز درخواست قیمت کنید
B2B Telecom Equipment Supplier — Request a Quote Todayتأمین‌کننده B2B تجهیزات مخابراتی — امروز درخواست قیمت کنید
2G/3G/4G/5G Network Equipment — Nokia, Ericsson, Huawei, ZTE & Moreتجهیزات شبکه 2G/3G/4G/5G — Nokia، Ericsson، Huawei، ZTE و بیشتر
2G/3G/4G/5G Network Equipment — Nokia, Ericsson, Huawei, ZTE & Moreتجهیزات شبکه 2G/3G/4G/5G — Nokia، Ericsson، Huawei، ZTE و بیشتر
Worldwide Shipping
Sea freight, land transport, air freight

100G QSFP28 Optical Transceivers: Types, Reach, and How to Choose 100G QSFP28 Optical Transceivers: Types, Reach, and How to Choose

Nov 6, 2026

100G is now the workhorse speed for both data center interconnect and telecom transport. But choosing the right QSFP28 module can still be confusing: the same "100G" label covers modules that differ in fiber type, reach, and price by a factor of ten. This guide breaks down the main QSFP28 families and how to match them to your actual link budget.

The Four Main QSFP28 Types

100GBASE-SR4 — VCSEL-based, multimode fiber (MPO-12 connector), up to 100 m on OM4. The cheapest option per port. Best within a rack or adjacent racks.

100GBASE-LR4 — EML lasers, single-mode fiber with LC duplex connector, 10 km reach. Uses 4 wavelengths on one fiber pair (CWDM). The default choice for campus and metro links.

100G PSM4 — parallel single-mode over 8-fiber MPO, 500 m to 2 km. Simple optics but burns 8 fibers per port; attractive when trunk fiber is abundant.

100GBASE-ER4 — 40 km reach over single-mode LC. Costs significantly more; only justified for long inter-site links where DWDM transport isn't available.

Fiber and Connector Checklist

Before ordering, confirm three things: (1) single-mode or multimode patch panels on both ends, (2) available connector space — MPO and LC are not interchangeable without rewiring, (3) current and future lane speed — SR4 and LR4 both break into 4x25G lanes, so a 100G port can later serve 25G breakout workloads if your switch supports it.

Compatibility Matters More Than Price

Data center switches and telecom boards often enforce vendor-coded modules. A cheap uncertified module that gets rejected by the port or loses DDM telemetry costs more than it saves. Always request a compatibility test report for your exact host platform — part numbers alone are not enough. For Huawei, ZTE, and Nokia transport and RAN equipment, matching the original part number is usually the safest path.

Practical Selection Rules

- Inside one facility: SR4 on OM4 — lowest cost, lowest power (~3.5 W)
- Up to 10 km: LR4 — the balanced default
- Up to 2 km with spare fiber: PSM4 — simple and robust
- Up to 40 km: ER4, or move the link onto DWDM if you have more than a few of these

What Boxin Telecom Stocks

We supply QSFP28 SR4/LR4/PSM4 modules and compatible equivalents for mainstream switches and telecom boards, plus SFP28, SFP56, and CXP options — all with DDM support and a compatibility guarantee. If you are unsure which type fits your link, contact Rock and the Boxin Telecom team: WhatsApp/Telegram/WeChat +86 186 6005 1788, or email yxs@boxintelecom.com. Send your port type and distance, and we will confirm the exact module within one working day.

100G is now the workhorse speed for both data center interconnect and telecom transport. But choosing the right QSFP28 module can still be confusing: the same "100G" label covers modules that differ in fiber type, reach, and price by a factor of ten. This guide breaks down the main QSFP28 families and how to match them to your actual link budget.

The Four Main QSFP28 Types

100GBASE-SR4 — VCSEL-based, multimode fiber (MPO-12 connector), up to 100 m on OM4. The cheapest option per port. Best within a rack or adjacent racks.

100GBASE-LR4 — EML lasers, single-mode fiber with LC duplex connector, 10 km reach. Uses 4 wavelengths on one fiber pair (CWDM). The default choice for campus and metro links.

100G PSM4 — parallel single-mode over 8-fiber MPO, 500 m to 2 km. Simple optics but burns 8 fibers per port; attractive when trunk fiber is abundant.

100GBASE-ER4 — 40 km reach over single-mode LC. Costs significantly more; only justified for long inter-site links where DWDM transport isn't available.

Fiber and Connector Checklist

Before ordering, confirm three things: (1) single-mode or multimode patch panels on both ends, (2) available connector space — MPO and LC are not interchangeable without rewiring, (3) current and future lane speed — SR4 and LR4 both break into 4x25G lanes, so a 100G port can later serve 25G breakout workloads if your switch supports it.

Compatibility Matters More Than Price

Data center switches and telecom boards often enforce vendor-coded modules. A cheap uncertified module that gets rejected by the port or loses DDM telemetry costs more than it saves. Always request a compatibility test report for your exact host platform — part numbers alone are not enough. For Huawei, ZTE, and Nokia transport and RAN equipment, matching the original part number is usually the safest path.

Practical Selection Rules

- Inside one facility: SR4 on OM4 — lowest cost, lowest power (~3.5 W)
- Up to 10 km: LR4 — the balanced default
- Up to 2 km with spare fiber: PSM4 — simple and robust
- Up to 40 km: ER4, or move the link onto DWDM if you have more than a few of these

What Boxin Telecom Stocks

We supply QSFP28 SR4/LR4/PSM4 modules and compatible equivalents for mainstream switches and telecom boards, plus SFP28, SFP56, and CXP options — all with DDM support and a compatibility guarantee. If you are unsure which type fits your link, contact Rock and the Boxin Telecom team: WhatsApp/Telegram/WeChat +86 186 6005 1788, or email yxs@boxintelecom.com. Send your port type and distance, and we will confirm the exact module within one working day.

Back to newsبازگشت به اخبار

Post commentارسال دیدگاه

Comments are reviewed before publication.دیدگاه‌ها پس از بررسی منتشر می‌شوند.